![]() ![]() Set a IP/subnet mask to the selected interface. Disable or disconnect the interfaces you are not using.ģ. Select a ethernet interface in your computer (if you have more than one) and connect it using a ethernet cable to the routerOS machine. If you are using a laptop or a computer with a wireless connection, turn it off: disconnect from Acces Point, turn off laptop switch, or disable interface.Ģ. Let it load, first boot takes a bit more.ġ. ![]() Everything needed to power on RouterOS Machine.Ġ.Know how to set a static IP in your windows/linux/MacOS machine.If you don't know which port is, try on all ports. If you are using a Routerboard board, you must use the Ethernet port that is POE-capable MAC Winbox won't work on the others (or at least, didn't work to me). You should know in advance how to use Wine or any other Win32 Loader for your non-Microsoft OS. It doesn't explain how to run Winbox on any OS different from Windows. This small guide works for any hardware running RouterOS. If you don't have that knowledge, you won't be able to connect and what's more, you sure don't need a RouterOS machine at all. Standard procedures to do a Winbox MAC connection is so easy as soon as you know how to set a static IP in your windows/linux machine. To give the routerboard an IP address, hard reset the device using the instructions here. The information on this page may be out of date. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |